5 Common Tiling Mistakes and How to Avoid Them

Poor Surface Preparation

Before you start tiling, make sure the surface is ready. Clean it well and ensure it's smooth. Any dirt or bumps can mess up your tiles. Take the time to prep, and you'll save yourself headaches later.

Also, check for moisture. Wet areas can cause tiles to lift or crack. Use a moisture barrier if needed. This small step can make a big difference.

Using the Wrong Adhesive

Not all adhesives are the same. Choose the right one for your tiles and surface. Some adhesives work better for walls, while others are best for floors.

Follow the manufacturer's instructions. Using the wrong adhesive can cause tiles to loosen over time. It's worth spending a few extra minutes to get it right.

Reapply the sealer every year for best results. This small task can extend the life of your tiles and keep them looking new.

Not Allowing Enough Drying Time

Patience is key when tiling. Allow enough time for the adhesive and grout to dry. Rushing this step can cause tiles to shift or grout to crack.

Follow the drying times recommended by the product manufacturer. It's better to wait a bit longer than to redo the job later.

If you need help, don't hesitate to call a professional. Sometimes, a little expert advice can save you a lot of trouble.